Sea rods is inevitable in the course of water, after water treatment, if not pay attention, it will damage the sea rods, the most common is to change the color of paint to become very ugly appearance. Serious and even grow with mold, because mold damp environment for the breeding.
After the sea inlet rod must be dealt with it dry, specific methods are:
If the back cover of the Sea with bottom bar, the back cover open, the sea rods all pulled out, do not pull too tight, relax some of the good. A well ventilated place to dry or dry.
The back cover of the sea with no bar, pulled out three quarters of each section, placed in ventilated place to dry or dry, so water from the gap between the two evaporation out of time to be longer to facilitate the dry .
If it is rainy weather, very humid air is not conducive to evaporation can be pulled out to sea half of each section bar, flat on the mattress on electric heat, evaporation of water. Hairdryer heating can also be dried.
When the sea after pole falls on the sea, but also timely and fully washed with water, then dry, because water more corrosive of the rod. Wheels have to open the side cover with fresh water to clean, because the water more corrosive to metal. |
