NEWS-Weihai TimeGo Fishing Tackle Co.,Ltd

How to repair the disconnection fishing rod

Author:威海光丽渔具有限公司 weihai guangli fishing co.,ltd 10-8-1 12:21 Read:2961

Based on years of fishing rod, if found to troubled disconnected, helpless. And the same time, the fishing always with transparent tape, in case.
Past although used to handle, but many poor effect, with paint method, shortly with transparent tape is seen water soluble paste. One day, by chance see son returned two small tube "502 instant adhesives" sticky radio-recorders parts, big hug and enlightened, try to test the attitude, while a spirit, fruit show. Six months after repair, pull still not line. Introduce below:

Will the rod, between "502" tip, with large cap screw off in the mouth, needle staff take it by outward, besmear is on a flat with 3 cm long, interface to as well. Stay dry, immediately after loaded taut, force can, the sooner the better! Then, the rapid exit, never. The objective is to make "502" flatten out, avoid bump. For, after again into pulling, pencil in the picture it by a marker. Pour out, see whether appropriate lap length, usually with 5-8 centimeters advisable. If lap long long, emery spent in a circle, according to spend long lap as short, according to the law, until satisfactory recoat.

After repair, so that water is afraid of economic material benefit, with the rod

From:威海光丽渔具威海渔具鱼竿 weihai fishing fishing rod

�